#if soper
Command provided by: chanserv/flags
#endif
Help for FLAGS:

The FLAGS command allows for the granting/removal of channel
privileges on a more specific, non-generalized level. It
supports nicknames, groups and hostmasks as targets.

When only the channel argument is given, a listing of
permissions granted to users will be displayed.

Syntax: FLAGS <#channel>

Otherwise, an access entry is modified. A modification may be
specified by a template name (changes the access to the
template) or a flags change (starts with + or -). See the
TEMPLATE help entry for more information about templates.

If you don't have +f you may still remove your own access
with -*.

#if !no_leveled_flags
If you are not a founder, you may only manipulate flags you
have yourself, with the following exceptions:
    - Only founders may add/remove +R.
    - Only founders may add/remove +s.
    - To add/remove +f, you must have +s and/or be a founder.

These restrictions do not apply in the case of removing your
own access.
#else
If you are not a founder, you may only manipulate flags you
have yourself.
#endif

#if permit_self_autoop
#if halfops
If you hold the flags +o, +h, and/or +v, you may add or remove
+O, +H, and/or +V on yourself regardless of whether you have
+f.
#else
If you hold the flags +o and/or +v, you may add or remove
+O and/or +V on yourself regardless of whether you have
+f.
#endif

#endif
#if !halfops
You may not edit users that have flags you don't have. For
this purpose, +v grants the ability to grant +V, +o grants
the ability to grant +O, and +r grants the ability to grant
+b.
#else
You may not edit users that have flags you don't have. For
this purpose, +v grants the ability to grant +V, +h grants
the ability to grant +H, +o grants the ability to grant +O,
and +r grants the ability to grant +b.

#endif
#if module chanserv/set_limitflags
If the LIMITFLAGS option is set for the channel, this is
restricted further, see help for SET LIMITFLAGS.

#endif
#if module exttarget/main
Some extended entity targets are available which allow you
to match chanacs against a situation instead
of against a nickname, hostmask or group.

Available exttargets are:
#endif
#if module exttarget/oper
$oper - Any user who is an oper (user mode +o).
#endif
#if module exttarget/registered
$registered - Any user who is identified to services.
#endif
#if module exttarget/channel
$channel:#channel - Any user who is the member of the given channel.
#endif
#if module exttarget/server
$server:server.name - Any user who is connected to the given server.
                      (The server name may have wildcards.)
#endif
#if module exttarget/chanacs
$chanacs:#channel - Any user with channel access in the given channel
                      (including hostmasks).
#endif

Syntax: FLAGS <#channel> [nickname|hostmask|group template]
Syntax: FLAGS <#channel> [nickname|hostmask|group flag_changes]

Permissions:
#if module chanserv/voice
    +v - Enables use of the DEVOICE and VOICE commands.
#else
    +v - This flag is useless.  Consider asking network staff to load chanserv/voice.
#endif
    +V - Enables automatic voice on join.
#if halfops
#if module chanserv/halfop
    +h - Enables use of the DEHALFOP and HALFOP commands.
#else
    +h - This flag is useless.  Consider asking network staff to load chanserv/halfop.
#endif
    +H - Enables automatic halfop on join.
#endif
#if module chanserv/op
    +o - Enables use of the DEOP and OP commands.
#else
    +o - This flag is useless.  Consider asking network staff to load chanserv/op.
#endif
    +O - Enables automatic op on join.
#if protect
#if module chanserv/protect
    +a - Enables use of the DEPROTECT and PROTECT commands.
#else
    +a - Used in conjunction with +O, grants protect channel status on join.
#endif
#endif
#if owner
#if module chanserv/owner
    +q - Enables use of the DEOWNER and OWNER commands.
#else
    +q - Used on conjunction with +O, grants owner channel status on join.
#endif
#endif
#if module chanserv/set_core
    +s - Enables use of the SET commands.
#endif
#if module chanserv/invite
#if module chanserv/getkey
    +i - Enables use of the GETKEY and INVITE commands.
#else
    +i - Enables use of the INVITE command.
#endif
#else
#if module chanserv/getkey
    +i - Enables use of the GETKEY command.
#else
    +i - This flag is useless.  Consider asking network staff to load chanserv/invite.
#endif
#endif
#if module chanserv/ban
#if module chanserv/kick
#if module chanserv/quiet
    +r - Enables use of the BAN, KICK, KICKBAN, QUIET, UNBAN, and UNQUIET commands.
#else
    +r - Enables use of the BAN, KICK, KICKBAN, and UNBAN commands.
#endif
#else
#if module chanserv/quiet
    +r - Enables use of the BAN, QUIET, UNBAN, and UNQUIET commands.
#else //1DD. chanserv/quiet not loaded
    +r - Enables use of the BAN and UNBAN commands.
#endif
#endif
#else
#if module chanserv/unban_self
#if module chanserv/kick
#if module chanserv/quiet
    +r - Enables use of the KICK, KICKBAN, QUIET, UNBAN, and UNQUIET commands.
#else
    +r - Enables use of the BAN, KICK, KICKBAN, and UNBAN commands.
#endif
#else 2D. chanserv/kick not loaded
#if module chanserv/quiet
    +r - Enables use of the QUIET, UNBAN, and UNQUIET commands.
#else
    +r - Enables use of the UNBAN command.
#endif
#endif
#else
#if module chanserv/kick
#if module chanserv/quiet
    +r - Enables use of the KICK, KICKBAN, QUIET, and UNQUIET commands.
#else
    +r - Enables use of the KICK and KICKBAN commands.
#endif
#else
#if module chanserv/quiet
    +r - Enables use of the QUIET and UNQUIET commands.
#else
    +r - This flag is useless.  Please notify staff or the services sponsor immediately in order to correct this epic fail by loading the correct modules.  At least chanserv/unban_self is recommended.  If staff fail to comply, you should probably think twice before putting any faith in them.
#endif
#endif
#endif
#endif
#if module chanserv/recover
#if module chanserv/sync
#if module chanserv/clear
    +R - Enables use of the RECOVER, SYNC and CLEAR commands.
#else
    +R - Enables use of the RECOVER and SYNC commands.
#endif
#else
#if module chanserv/clear
    +R - Enables use of the RECOVER and CLEAR commands.
#else
    +R - Enables use of the RECOVER command.
#endif
#endif
#else
#if module chanserv/sync
#if module chanserv/clear
    +R - Enables use of the SYNC and CLEAR commands.
#else
    +R - Enables use of the CLEAR command.
#endif
#else
#if module chanserv/clear
    +R - Enables use of the CLEAR commands.
#else
    +R - This flag is useless.  Consider asking network staff to load chanserv/recover.
#endif
#endif
#endif
    +f - Enables modification of channel access lists.
#if module chanserv/topic
    +t - Enables use of the TOPIC, TOPICAPPEND, TOPICPREPEND, and TOPICSWAP commands.
#else
    +t - Permits changing the topic of the channel in spite of the TOPICLOCK setting.
#endif
#if module chanserv/set_pubacl
    +A - Enables viewing of channel access lists without the PUBACL setting.
#else
    +A - Enables viewing of channel access lists.
#endif
#if module chanserv/successor_acl
    +S - Marks the user as a successor.
#endif
    +F - Grants full founder access.
    +b - Enables automatic kickban.
#if module chanserv/ban
    +e - Exempts from +b and enables unbanning self with UNBAN.
#else
#if module chanserv/unban_self
    +e - Exempts from +b and enables unbanning self with UNBAN.
#else
    +e - Exempts from +b.
#endif
#endif

#if module chanserv/successor_acl
The special permission +* adds all permissions except +b, +S, and +F.
#else
The special permission +* adds all permissions except +b and +F.
#endif
The special permission -* removes all permissions including +b and +F.

Examples:
    /msg &nick& FLAGS #foo
    /msg &nick& FLAGS #foo foo!*@bar.com VOP
    /msg &nick& FLAGS #foo foo!*@bar.com -V+oO
    /msg &nick& FLAGS #foo foo!*@bar.com -*
    /msg &nick& FLAGS #foo foo +oOtsi
    /msg &nick& FLAGS #foo TroubleUser!*@*.troubleisp.net +b
    /msg &nick& FLAGS #foo !baz +*