diff options
Diffstat (limited to 'doc/FAQ')
| -rw-r--r-- | doc/FAQ | 687 |
1 files changed, 0 insertions, 687 deletions
diff --git a/doc/FAQ b/doc/FAQ deleted file mode 100644 index fd54b7234..000000000 --- a/doc/FAQ +++ /dev/null @@ -1,687 +0,0 @@ -1. PROJECT RELATED QUESTIONS - -1.1 What is KVIrc? What does the KVIrc name stand for? -1.2 Why is KVIrc not fully integrated in KDE? - - -2. COMPILATION - -2.1 I can't compile KVIrc from Git, what's wrong? -2.2 Internal Compiler Errors? - - -3. INSTALLATION - -3.1 There is a problem during package installation/creation - file /usr/share/services/irc.protocol from install - kvirc-version.package conflicts with file from package xxx - - -4. IRC - -4.1 How do I join a channel? -4.2 How do I autojoin channels? -4.3 How do I enable automatic NickServ identification? -4.4 I can't see my national characters, what's wrong? -4.5 I can't connect to an IPV6 server, what's wrong? -4.6 /me doesn't support the '$' character, what's wrong? -4.7 /me doesn't support the '"' (double quote) character, what's wrong? -4.8 /me can't contain the ';' character, what's wrong? -4.9 I try to do a /whois on nick blah\ but I get the reply for blah (without the slash) -4.10 What is AVATAR protocol? Is there any documentation about it? -4.11 The log files seem to be saved randomly, when I open a log - I can see only a part of the text that actually should be there -4.12 The DCC transfers seem to be interrupted after the first few bytes: - KVIrc says that the remote end has closed the connection. - - -5. ADVANCED IRC FEATURES - -5.1 How do I connect to an SSL-enabled IRC server? -5.2 How do I use DCC over SSL? -5.3 Do I need a SSL certificate? -5.4 How do I create a SSL certificate? -5.5 I can't get KVIrc to use my SSL certificate in a DCC, what's wrong? -5.6 KVIrc crashes when a certificate is used under Windows, what's wrong? -5.7 How do I enable Mircryption (encryption in general) for a specific channel? -5.8 How do I execute a process and send its output to a channel? -5.9 How do I keep channels and queries open after a disconnect? -5.10 I have an unreliable ISP connection but KVIrc takes a really long - time to detect a disconnection and reconnect. -5.11 I'm in a LAN and KVIrc uses a wrong IP address in DCC transfers - - -6. APPEARANCE - -6.1 On Windows KVIrc seems to slow-down sometimes, what's wrong? -6.2 I don't see the channel popup menus anymore, what's wrong? -6.3 Does KVIrc support Themes? -6.4 I hate all that colors, what can I do about it? -6.5 On Windows, how do I use Firefox, Opera or any other browser to open links instead of explorer? - - -7. CRASHES - -7.1 What the heck is a GDB stack trace and how do I get it? -7.2 KVIrc hangs up, but doesn't crash. How do I report debug information? -7.3 KVIrc exits by itself or simply disappears without any apparent reason. -7.4 KVIrc dies when using alias(identify){ identify password; } - - -8. SCRIPTING / ADDONS - -8.1 Trying to load a script I get a "can't load the module 'script'" error. - - --------------------------------------------------------------------------------- -1. PROJECT RELATED QUESTIONS --------------------------------------------------------------------------------- - - -1.1 What is KVIrc? What does the KVIrc name stand for? - - KVIrc is a cross-platform Internet Relay Chat client. - The name stands for K Visual Internet Relay Chat client. - The K prefix comes from the old times, when KVIrc was bound to the - KDE project and depended on the KDE libraries to run. Actually this - is not true anymore since KVIrc depends only on the Qt library from the - Qt Company and runs also on platforms where KDE can't run. - - -1.2 Why is KVIrc not totally integrated in KDE? - - First of all read the answer for question 1.1. - We could provide a more complete integration by the means of conditional - compilation but since it would require additional efforts to synchronize - the KVIrc sources with the KDE library changes we choose not to do it. - If you wish to contribute some code that better integrates KVIrc with - KDE you're welcome to do so: we will happily accept your patches as long - as you promise to maintain them :) - - --------------------------------------------------------------------------------- -2. COMPILATION --------------------------------------------------------------------------------- - -2.1 I can't compile KVIrc from Git, what's wrong? - - Have you checked the requirements? - *Carefully* read the INSTALL file that comes with the distribution: - it contains the information which solves 95% of the problems that - you may encounter. You may also try digging in our mailing list - archive: many problems have been solved there. - If you still can't get it to work, please either subscribe to the KVIrc - mailing list (see www.kvirc.net) and report the problem there. Alternatively - open a issue at https://github.com/kvirc/KVIrc/issues or join #kvirc - on Freenode and ask the channel members for a hint. - - -2.2 Internal Compiler Errors? - - Compile errors like this: - In file [somefile]:[someline] internal error: - Segmentation fault - Please submit a full bug report, - with preprocessed source if appropriate. - See <URL:http://bugzilla.redhat.com/bugzilla/> for instructions. - - This error can have multiple reasons. - 1) A compiler bug: my GCC 3.2 20020903 (default on RH 8.0) spits - out 5-6 of them daily. Usually it is solved by simply restarting the *make* command. - If it doesn't go away or if it gets really frequent and annoying you might try to upgrade the compiler. - 2) A memory corruption: this is really frequent: one of your memory banks is spitting random bytes - sometimes. Usually the problems come out under heavy system load (kernel, KDE or KVIrc compilation for example). - You can check for memory corruption by trying different RAM modules (or removing them one at a time to discover - the broken bank). You can also try a program called memtest and a kernel - patch that can force the broken memory banks to be ignored by the kernel (allocated permanently to a dummy kernel task). - These tools can be found by digging the web with your favorite search engine. - 3) A deeper hardware problem: if upgrading the compiler and changing memory banks doesn't help then - it *might* be a deeper hardware problem: bus errors, faulty IDE (or SCSI) controller or even buggy CPU... - Well.... - -------------------------------------------------------------------------------- -3. INSTALLATION -------------------------------------------------------------------------------- - -3.1 There is a problem during package installation/creation - file /usr/share/services/irc.protocol from install - kvirc-version.package conflicts with file from package xxx - - This is a known issue with all types of packages that handle - file conflicts. KVIrc installs the IRC protocol handler for KDE - and the same is done by KSirc and kopete (and maybe others). - There is no particular reason for KVIrc to fix it in the core - distribution (and there is also no simple way to do it). - Either the package maker must exclude the irc.protocol - file from installation or mark it as optional in some way or the - users must use some sort of force flag during the installation. - - -------------------------------------------------------------------------------- -4. IRC -------------------------------------------------------------------------------- - -4.1 How do I join a channel? - - Type "/join #channelname" - - -4.2 How do I autojoin channels? - - There are many ways to do it. - For example: - Select "Scripting/Events" from the KVIrc menu. - Lookup the "OnIrc" entry in the left pane of the window that pops up. - Right-click on that entry and select Add handler. - A default handler will be created. In the right pane write: - join #kvirc - join #kde-users - join #somechannel - .... - Now click OK and you're done: you have just created a handler for an event. - Reconnect to a server and KVIrc will autojoin the channels that you have selected. - Another option (nicer, if you use several servers) is to go to the servers options - page and click the button labeled 'Advanced' on the entry for the single server. - There is a server-specific "On connect execute..." event. - - -4.3 How do I enable automatic NickServ identification? - - KVIrc supports two kind of NickServ identification rules: per-network and global. - The per-network rules can be accessed from the server options page. - You need to select a network in the list view (not a server!) and then click - "Advanced...". In the dialog that appears there is a NickServ tab - on that you can add your identification rules. Adding a rule - should be straightforward (if you stop the mouse over an item you will likely get a small - tool tip with the explanation). Each rule is composed of: - - the nickname that is being identified: the rule will be applied only - when your current nickname corresponds to this one. - - a nick server user mask that must be matched by the NickServ user - in order for him to be recognized as the real NickServ asking for - identification. You will probably use something like NickServ!service@* - - a message regular expression that must be matched by the message - that the NickServ sends when requesting the identification. - You will probably use something like "If this is your nick, - identify yourself with /ns IDENTIFY password" - - an identification command that will be executed when all the rules - above match. You will probably use something like "ns IDENTIFY yourpassword" - The global rules can be created in the IRC::NickServ page of the options dialog - (accessible from the Settings/Configure KVIrc... menu). The main difference - is that each rule has a server mask that must be matched by the current - server name for the rule to be applied. - KVIrc first looks in the per-network rules and if none matches it looks - in the global rules. - - -4.4 I can't see my national characters, what's wrong? - - There are several ways to fix your national characters display. - General encoding: - Open the options dialog and go to the "Encoding" page. - You can set explicitly the encoding to be used for the whole application. - If you choose "Use Language Encoding" KVIrc will try to guess the - encoding from your system settings. If this doesn't work then the reasons - may be: - - Your system settings are wrong - You need to fix them - - Your server applies some specific encoding to the data - See "Server encoding" - - You're chatting with people that have different system settings - See "Channel & Query encoding" - Server encoding - Besides the general encoding you can set one encoding per server. - This is done in the server options dialog (Click Advanced...). - The encoding will be applied to all the text that comes from - and goes to the server. If you choose "Use system encoding" - then the server will inherit the "General encoding" value above. - If this doesn't work then you have either set it incorrectly or - you are chatting with people that use different encodings. - In this case see "Channel & Query encoding" - The server encoding is used also to decode nicknames and - channel names on servers that support it. - Channel & Query encoding - Besides the general and server encoding you can set also per-window - encoding in channels and queries. This encoding will be applied - ONLY to the text sent to or received from that channel or query. - This feature is useful when chatting over a non Unicode aware - IRC server (nearly all at the time of writing) with people - that have settings different than your general defaults or - the server default. - - Keep in mind that IRC has a MAJOR problem with character encoding - and in fact the formal definition of the protocol requires it - to be only 7bit safe. This means that on some servers you may - see your national characters eaten by the IRC network and there - is almost nothing you can do about that... - - UTF-8 is the best encoding we can get on IRC. Try to convince - other people to use it :) - - -4.5 I can't connect to an IPV6 server, what's wrong? - - First of all make sure that your IPV6 stack is setup correctly. - Can you ping6 other IPV6 other machines? - - # ping -6 ipv6.google.com - - Is the IPV6 support enabled in your KVIrc executable? - To find it out, try - - /echo $features - - in the KVIrc command line. You should get a comma separated list of - features compiled in the executable. If the list contains "IPv6" then - the support is compiled in, otherwise you must check your compilation - stage to guess what went wrong. - To connect to an IPV6 server you can use /server -i <servername> - If you can ping other IPV6 machines, the IPv6 support is compiled in your - executable and you still can't connect to an *existing* IPv6 server then - you may have found a bug :) Report it. - - -4.6 /me doesn't support the '$' character, what's wrong? - - This is NOT a bug : this is a feature : KVIrc supports (and substitutes!) variables in all the commands. - You can escape your $ sign by using the backslash character: - - /me has gained \$100 - - Otherwise, you can use friendly command line mode, where special symbols are not interpreted. Just click the green - arrow next to the input field and then click the KVS icon. - - -4.7 /me doesn't support the '"' (double quote) character, what's wrong? - - This is NOT a bug : this is a feature : a string enclosed in double quotes will have its whitespace preserved - while the other strings will have the whitespace simplified. This is valid for ANY command. - You can escape your " sign by using the backslash character: - - /me feels a bit \"foo\" - - Otherwise, you can use friendly command line mode, where special symbols are not interpreted. Just click the green - arrow next to the input field and then click the KVS icon. - - -4.8 /me can't contain the ';' character, what's wrong? - - This is NOT a bug : this is a feature : KVIrc supports multiple commands on a single line and uses ';' as a command - separator. You can escape your ';' sign by using the backslash character: - - /me is hungry \;) - - Otherwise, you can use friendly command line mode, where special symbols are not interpreted. Just click the green - arrow next to the input field and then click the KVS icon. - - -4.9 I try to do a /whois on nick blah\ but I get the reply for blah (without the slash) - - In KVIrc /whois is a scripting command and the nickname is a command parameter. - In scripting commands the backslash is a special character with several "escape" - meanings. To include a literal backslash inside a parameter you MUST double it, - thus the correct command to issue is /whois blah\\ - - Otherwise, you can use friendly command line mode, where special symbols are not interpreted. Just click the green - arrow next to the input field and then click the KVS icon. - - -4.10 What is AVATAR protocol? Is there any documentation about it? - - AVATAR is a simple CTCP based protocol that allows associating images (avatars) - to IRC users. The protocol definition is simple: - - - CTCP AVATAR QUERY: - :<source> PRIVMSG <target> :<0x01>AVATAR<0x01> - Queries the avatar of the <target>. - - CTCP AVATAR REPLY: - :<source> NOTICE <target> :<0x01>AVATAR <avatar_url><0x01> - Asserts that the <source> user's avatar is located at <avatar_url> - that usually will be something like http://server.domain.top/avatarimage.jpg. - - KVIrc supports also DCC based avatars that are simply "offered" to the - remote users. In this case the <avatar_url> does not contain the http:// - prefix but is a simple file name. The remote users request the avatars - by issuing a DCC GET command. This is an useful but secondary extension - and can be ignored by simple implementations. If you need more information - about this method please write to pragma at KVIrc dot net. - - -4.11 The log files seem to be saved randomly, when I open a log - I can see only a part of the text that actually should be there - - KVIrc does not explicitly flush the log files while writing them. The OS - (or the underlying C library) does the flush operation when necessary. - This means that blocks of the log file will be added to the file on disk - only once in a while. If you really need to see the logs in real time - then you can explicitly flush the log files by scripting. - Just add a script like this to your OnKVIrcStartup event: - - timer(flushlogfiles,30000) - { - foreach(%x,$window.list(all,any)) - { - if($log.file(%x)) - { - echo -w=%x "Flushing log file..."; - log.flush -w=%x; - } - } - } - - The script above will flush all the log files every 30 seconds. You may - remove the echo statement if you're annoyed by the output :) - - -4.12 The DCC transfers seem to be interrupted after the first few bytes: - KVIrc says that the remote end has closed the connection. - - Make sure that you don't have activated the "Send ACK for byte 0" - option in "Options->DCC->File Transfer->Advanced". - This option should be used ONLY IF you have problems without. - - -------------------------------------------------------------------------------- -5. ADVANCED IRC FEATURES -------------------------------------------------------------------------------- - - -5.1 How do I connect to an SSL-enabled IRC server? - - Use /server -s <servername> - It should work also over IPV6. - If it doesn't work then your executable might have no SSL support compiled in. - To find it out type - - /echo $features - - in the KVIrc command line. If "SSL" is not in the list then you must go back - to the compilation phase and see what went wrong. - - -5.1 How do I use DCC over SSL? - - /dcc.chat -s <nickname> should work - - -5.3 Do I need a SSL certificate? - - No you shouldn't need it, but you can use it if you want. - - -5.4 How do I create a SSL certificate? - - A test self-signed certificate can be created by using the CA.pl perl script included - in the OpenSSL distribution. It will be something like CA.pl -newcert - - -5.5 I can't get KVIrc to use my SSL certificate in a DCC, what's wrong? - - The SSL protocol doesn't require the "client" to send the certificate: it is - sent only if the "server side" requests it (it is not the KVIrc case). - The server side may have a certificate and you can set it in the SSL options page. - If your Private Key is stored in the certificate file pass the same filename - to both Certificate and PrivateKey option. - Remember to set the password if needed. - - -5.6 KVIrc crashes when a certificate is used under Windows, what's wrong? - - This is probably a bug of the SSL dll shipped with the windows version of KVIrc. - You might try with a different version of this dll. - - -5.7 Can I encrypt my messages? -(or: How do I enable mircryption (encryption in general) for a specific channel?) - - KVIrc supports encryption for channels, queries and DCC chats by the means - of text transformation engines. You can access the list of the engines - by clicking the button with the yellow lock in the upper right corner - of the window. In the pane that will appear select "use text transformation" - and then choose one of the available engines. - The Mircryption engine is an implementation of the mircryption protocol and - supports both ECB and CBC mode. There is also a wide variety of Rijndael based encryption - engines as well as some funky other text transform tricks. - Most of the engines will need a pair of keys to encrypt and decrypt text - and in most cases you will use the same key for both encrypting and - decrypting. In the particular case of Mircryption you can enable - CBC mode by prefixing your key(s) with the "cbc:" string. - Once you have entered the keys just click on OK and start "talking" in the - window. Any encrypted text will have a "lock" overlay in his icon. - If you want to avoid encrypting a particular text line (maybe because - you want to allow everyone on a channel to read it) you can start - the line with a CTRL+P character. - - -5.8 How do I execute a process and send its output to a channel? - - The straight way to do this is - - /exec("your command here"){ say $1; } - - Since it is not too much "user friendly", you can alias it in - the following way: - - /alias(runandsay){ exec($0-) { say $1; } } - - Then you would simply run - - /runandsay cat /proc/cpuinfo - - in the channel window you want the output sent to. - - Keep in mind that this is a "brute" approach and I'm sure that after - reading some documentation (start from /help exec) you will be able to - find more elaborate and nice ways to send a process output to a channel/query. - - -5.9 How do I keep channels and queries open after a disconnect? - - KVIrc can keep your channels and queries open when the connection terminates - unexpectedly. This will probably make sense only if you plan to - reconnect to the same server or at least the same network (either manually - or automatically). - - An "unexpected disconnect" is a connection termination not explicitly caused by - the KVIrc user. This means that the connection is interrupted, either - by the networking stack or by the remote server, without the user - having sent a QUIT message (by the means of the /quit command or by pressing - the "disconnect" button in the toolbar). - - All this because the normal behaviour of a /QUIT command is, yes, to quit - your current connection without leaving traces of it. - - To keep the channels and queries open you just need to select the - relative options in the "Connection" page of the options dialog - (on unexpected disconnect: "Keep channels open" an/or "Keep queries open"). - - Then you might also select "Automatically reconnect", "Rejoin channels - after reconnect" and "Reopen queries after reconnect" to bring your - "dead windows" to life again :) - - Finally, you can simulate an "unexpected disconnection" by using the -u switch - of the /quit command. This might be useful when you want to explicitly - quit your connection while leaving the channels and queries open... maybe - because you need to renew the connection to your ISP before reconnecting ;) - - -5.10 I have an unreliable ISP connection but KVIrc takes a really long - time to detect a disconnection and reconnect. - - KVIrc doesn't detect itself that the connection has dropped until your - kernel explicitly times out. KVIrc measures lag, instead, that will - probably grow up a lot when the connection has dropped. - You can write a handler for the OnLagCheck event that will detect - the lag growing over a certain threshold and reconnect. - This involves opening the event editor, selecting OnLagCheck - and choosing "Add handler" from the right mouse menu. - In the handler write: - - if($1 > 30000){ quit -f -u; } - - 30000 is just a sample threshold (it means 30000 milliseconds!), replace - it with a value of your choice. - quit -f -u will close the current connection immediately (-f = force) - and will simulate an "unexpected disconnection" condition (-u = unexpected). - If you then enable automatic reconnection (see answer for question 5.9) - in the options dialog, KVIrc will automatically reconnect and rejoin channels. - - -5.11 I'm in a LAN and KVIrc uses a wrong IP address in DCC transfers - - KVIrc supports a couple of methods for guessing the right IP address for - DCC transfers: you only have to guide it a bit :) - - The first thing to try is "Guess address from IRC when unroutable" (Options->DCC). - This will perform a lookup on your own IRC mask once you connect - to an IRC server and use the address as source in DCC transfers. - (You need to reconnect to the server to make this option work!) - This trick will fail when your hostmask is cloaked (mode +x on recent IRC servers): - KVIrc will tell you that it couldn't look up the hostname and give up. - - In this case you might try to set a fixed address to be sent as source - in the DCC transfers: you just need to fill in the *IP address* of your - router in the option field. This field doesn't support hostname lookups - and it won't update automatically when you router's IP changes. - However, if you router's IP has a DNS entry, you can ask KVIrc to fill - this field with a simple script to be performed at every connection. - - event(OnIRCConnectionEstablished,updatedccsource) - { - ahost(yourrouterhostname.dyndns.org) - { - option boolDCCSendFakeAddressByDefault 1 - if($1)option stringDefaultDCCFakeAddress $2 - else echo "Couldn't look up the router's hostname" - } - } - - When transferring files to other KVIrc clients you may also try the - DCC RSEND protocol instead of DCC SEND. It will ask the remote end - to listen instead. - -------------------------------------------------------------------------------- -6. APPEARANCE -------------------------------------------------------------------------------- - -6.1 On Windows KVIrc seems to slow-down sometimes, what's wrong? - - This is usually caused by the heavy graphics: try removing some graphic effects like the - pseudo-transparency. I have experimented that it happens almost always on 32-bit displays. - Switching to 16 or 24-bit may also help. - - -6.2 I don't see the channel popup menus anymore, what's wrong? - - If something went wrong with KVIrc settings (a crash when the script settings - were saved?) or if you have messed with the scripting options and you - want to get back the original behaviour (default script) you can choose - "Scripting/Restore default script" from the KVIrc menu. - (WARNING: It will erase any script modification you have made!) - KVIrc should be able to detect such situations and automatically suggest the - re-installation of the default script. - -6.3 Does KVIrc support Themes? - - Yes, KVIrc has introduced a Theme Manager. You can find it in the Option dialog. - From there you can change the way KVIrc looks: fonts, colors, windows behaviour, - icons, taskbars, and so on. - Once you have changed the theme, you can export it and share with your friends, - or send it to the KVIrc staff to see it published on the web site. - - -6.4 I hate all that colors, what can I do about it? - - By fiddling with the options you can make KVIrc appear even monochromatic. - Go to Options/Theme and select the minimalist theme: it will set white text - on black background and will disable the displaying of a lot of icons. - This is a good starting point for you console addicted hackerz :D - - -6.5 On Windows, how do I use Firefox, Opera or any other browser to open links instead of explorer? - - Currently any browsers defined as the default browser, will be used automatically. - Use the instructions below only to set your preferred browser. - - These days KVIrc uses a "run cmd.exe /c start \ "$0" command to open the currently set default browser. - - Go to the "URL Handlers" options page and set - - run "C:\\path\\to\\your\\browser.exe" "$0" - - as URL handler for the protocol you're interested in (maybe in all). - Please note the double backslashes (a single backslash is an escaping character) - - Suepahfly suggests to use - - rundll32 url.dll,FileProtocolHandler "$0" - - as URL handler to open the URL in the default windows browser. - - -------------------------------------------------------------------------------- -7. CRASH -------------------------------------------------------------------------------- - -7.1 What the heck is a GDB stack trace and how do I get it? - - A GDB stack trace is a "photograph" of the state of the KVIrc internals - taken when a certain event has occurred. The most common event - is a program crash (Segmentation Fault). - The stack trace helps (or even allows) the developers to locate the - crash cause in the program sources. - To obtain a GDB stack trace you must: - - - Compile KVIrc with 'cmake -DDEBUG=1' option. - Without this switch the stack trace is USELESS. - - Have a working installation of GDB (the GNU Project Debugger) - This is usually available on your distribution cd - and you may already have it installed. - - Run KVIrc: - # gdb kvirc - When the gdb prompt appears write: - # (gdb) run -f - Make KVIrc crash: GDB will tell something about - a signal received by the program. Write then: - # (gdb) bt - The text you see is the stack trace you wanted :) - Copy+Paste into a new bug ticket at - https://github.com/kvirc/KVIrc/issues/new - - -7.2 KVIrc hangs up, but doesn't crash. How do I report debug information? - - Use GDB to get a stack trace as in answer to question 7.1. - Since your KVIrc doesn't crash you will have to interrupt the execution - manually while it is hung up. You can do it by pressing CTRL+C in GDB. - - -7.3 KVIrc exits by itself or simply "disappears" without any apparent reason. - - Yes. It probably crashed but you haven't noticed that. - We NEED a GDB stack trace or a working procedure to reproduce the - behaviour in order to hunt it. - - -7.4 KVIrc dies when using alias(identify){ identify password; }; - - This is infinite recursion: a programming error. - Take a look at http://en.wikipedia.org/wiki/Infinite_loop, learn - that once for all and fix your script. - - -------------------------------------------------------------------------------- -8. SCRIPTING / ADDONS -------------------------------------------------------------------------------- - -8.1 Trying to load a script I get a "can't load the module 'script'" error. - Full version of the error (this is for Linux, may vary on Windows/other OS): - --- - [KVS] Runtime Error: Module command call failed: can't load the module 'script': - QLibrary::load_sys: Cannot load /usr/local/share/kvirc/4.0/modules/libkviscript.so - (/usr/local/share/kvirc/4.0/modules/libkviscript.so: no such file or directory) - --- - The script you are trying to load is calling an old KVIrc interface. Probably the - script was created for KVIrc <= 3.2, and has not been updated to work on newer - versions. The "script" module interface has been renamed to "addon" between 3.2.0.99 - and 3.2.4; the new "addon" module exports all the old "script" interfaces, so - converting the script should be quite easy. |